sure, set an access list that only permits your internal subnet.
such as:
access-list 1 permit 10.10.10.0 0.0.0.255
then enter the following commands:
config t
line vty 0 4
access-class 1 in
end
make sure you have a password set on your vty ports.
MAKE SURE YOU TEST THIS ON A ROUTER THAT YOU CAN ACCESS VIA THE CONSOLE!!!
> -----Original Message-----
> From: Rodney Jackson [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 30, 2000 10:53 AM
> To: '[EMAIL PROTECTED]'
> Subject: access-list and telnet
>
>
> Guys,
>
> I only want admins from the inside of our network to be able
> to access the routers via telnet is there any way I could use
> access-lists to control this?
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
