Router(config)# access-list 10 permit 10.10.10.0 0.0.0.255
Router(config)# line vty 0 4
Router(config-line)# access-class 10 in
Assuming your internal network is 10.10.10.0/24 the above configuration
commands will only allow the telnet sessions to be initiated by computers
internal to your network. You can also restrict the telnet sessions to a
particular machine by playing around with the access-list.
Regards
Atif
-----Original Message-----
From: Rodney Jackson <[EMAIL PROTECTED]>
To: '[EMAIL PROTECTED]' <[EMAIL PROTECTED]>
Date: Wednesday, August 30, 2000 8:07 PM
Subject: access-list and telnet
>Guys,
>
>I only want admins from the inside of our network to be able to access the
routers via telnet is there any way I could use access-lists to control
this?
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
