have you tried subinterfaces ?
Andy Lennon
CCNP/DP MCSE
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Erick B.
Sent: 01 September 2000 06:29
To: [EMAIL PROTECTED]; Groupstudy Cisco
Subject: Re: NAT WITHIN An ETHERNET INTERFACE.
Each cisco interface can only be inside or outside,
not both. Looks like you'll have to get a 2nd ethernet
for your 2600.
--- [EMAIL PROTECTED] wrote:
> Hi,
> I have an Ethernet Network with 2 ips.
> One ip is Internet IP. The other is PRIVATE ip.
> I want the machines with the private ip\'s also to
> browse without the use of a proxy server.
> is it possible to implement this is
> cisco NAT or anyother service.
>
> The cisco IOS version is 11.3 and the router is
> cisco 2600
> model with a single ethernet port.
>
>
> regards
>
>
>
>
>
-----------------------------------------------------
> This mail sent through http://www.sify.com
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
