Sounds like it might be a memory leak on the router. You might look to see
if this is a bug, or just upgrade it to a newer release (General Deployment
is usually reliable, and I think it's up to 12.0.12) HTH
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Zafar
Sent: Friday, September 01, 2000 6:52 AM
To: [EMAIL PROTECTED]
Subject: 2503 CPU Load Shooting up
Hello,
I am facing a very strange problem with my 2503 Router running IOS Version
12.0(4)T. >From time to time the router cpu load shoots up to 90-100% and
its gives following message at console:
00:04:16: %SYS-2-MALLOCFAIL: Memory allocation of 1680 bytes failed from
0x31A97
90, pool I/O, alignment 0
-Process= "Pool Manager", ipl= 6, pid= 4
-Traceback= 31D1426 31D2150 31A9798 31DB784
Even after reboot the situation remains same. I tried shutting down eth0 and
as soon as I shut down e0 the load drops but when I do "no shut down" it
shoots again.
The situation continue for few minutes and then it starts behaving normal
automatically. This happened at least three times during the last week. I
will greatly appreciate if someone kindly advise whats the possible problem
and how to get out of this situation?
Regards,
Zafar
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
