You need to tell the router that it has only a single memory partition :
partition 1
HTH,
Casey
>From: Ashfaq Aslam <[EMAIL PROTECTED]>
>Reply-To: Ashfaq Aslam <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Memory question - pls help !!
>Date: Fri, 01 Sep 2000 21:54:30 +0100
>
>Hi there,
>
>I have just installed 2 X 8MB Flash modules in 2503 Router and when I do
>"Show Version" it shows up as two seperate 8MB Flashes instead of 16MB.
>E.g.
>
>cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of
>memory.
>Processor board ID 04594752, with hardware revision 00000000
>Bridging software.
>X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
>Basic Rate ISDN software, Version 1.0.
>1 Ethernet/IEEE 802.3 interface.
>2 Serial network interfaces.
>1 ISDN Basic Rate interface.
>32K bytes of non-volatile configuration memory.
>8192K bytes of processor board System flash partition 1 (Read/Write)
><<***************???***
>8192K bytes of processor board System flash partition 2 (Read/Write)
><<***************???***
>
>Configuration register is 0x2142
>
>Router#
>
>Does anyone know how to make it come up as 16MB?
>
>Thanks for your help !!!
>
>Rgds,
>Ash
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
