Re: console 5500

[jh]

I have tried both cables witha variety of connecting adapters.   I did manage to start getting data in the hyperterm window using an ethernet cable.  But the data I get is garbled, no text.  I assume I have the right physical elements in place, I just need to figure out where the data is getting garbled.  I have tried several setting with flow control but nothing has changed.     Any more help is greatly appreciatted   James Haughom   ----- Original Message ----- From: Henrique Issamu Terada To: jahaughom ; [EMAIL PROTECTED] Sent: Friday, September 01, 2000 10:10 AM Subject: Re: console 5500 whant kind of supervisor are you using ?   if it is sup II , you can use normal rollover cable. But, if it is sup III , you must use straight-ahead cable (comes along with Cat5500 , a yellow cable)   good luck   Henrique Issamu Terada CPM Comunica��es - Brazil CCNA Certified ----- Original Message ----- From: jahaughom To: [EMAIL PROTECTED] Sent: Thursday, August 31, 2000 9:20 PM Subject: console 5500 I am trying to get a console on a 5500 switch.   When I bring up hyper term I am not getting anything.  Occasionally I will get unintelligble items appear in the window.   I have tried com1 com2 com3 bps 9600 flowcontrol hardware,none,xonxoff as well as different cables all the lights on the switch are green   Any help would be greatly appreciated