The << dialer in-band >> has to be in the config if your the one that's
doing
the dialing.....This command indicates that this is the interface that will
be
doing the dialing.....Not only that; but the << dial wait-for-carrier-time
XX >>
indicates that it will wait up to 60 seconds for the interface to basically
receive
DCD from the interface that is associated with the Dialer / BRI interface
and
it will then do the dialing depending on how quick it receives DCD.....Hope
this helps.....Easiest thing to do is to go to www.cisco.com and do a look
up
on ISDN or just do a find on Dial Cookbook and this will help out.....
-JEK-
NRS Hariharan <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
> I have installed a 2503 router for ISDN dial back for a leased
line.The
> vendor who configured it has included the following commands in the dilaer
> interface .
>
> (1) #dialer in-band
>
> and
>
> (2) #dialer wait-for-carrier-time 60
>
> Since the above commands should not be used for ISDN i removed
them .
> But when I saved the new config and saw the file,the following commands
were
> also missing fom the dialer interface which was there previously :
> #dialer idle-timeout
> #dialer string xxxxx Class xx
> #dilaer hold-queue xx
> #dialer load-threshold xxx either
> #dialer-group x
>
> and the only commands which were present from the previous config
were
> :
> #ip address negotiate
> #no ip directed-broadcast
> #encapsulation ppp
> #ppp authentication pap callin
> #ppp pap sent-user xxxx password xxxx
>
> Can anyone provide a solution for the above
>
> Thanks in advance
>
>
> hari
>
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
