clock-rate makes no difference to the metric .
I cannot see why the bandwidth parameter cannot be
different on both neighbouring routers .
For one router in question only the outbound
interfaces to the destination are considered in the
calculation of the metric .
flem
--- Andrew Larkins <[EMAIL PROTECTED]> wrote:
> EIGRP metric looks at bandwidth, delay, mtu, load,
> reliability.
> For an adjaceny to form they metrics must be the
> same on both sides, or the
> 2 routers will never route or pass updates.
> Best to make the same changes on both sides. As for
> the clock rate, I am not
> to sure here - a flying guess says yes
>
> Regards
> Andrew
>
> -----Original Message-----
> From: SV [mailto:[EMAIL PROTECTED]]
> Sent: 07 September 2000 17:25
> To: [EMAIL PROTECTED]
> Subject: EIGRP metric
>
>
> Hi friends
>
> I am reading up on EIGRP and have some questions
> My scenario is simple; two routers connected by a
> DCE/DTE crossover cables.
> 1) Does the clock rate set on the DCE interface
> effect the EIGRP metric in
> any way.
>
> 2) If suppose I change the bandwidth and the delay
> of the interface on
> Router 1 from the default values, should I have to
> change it on the router
> R2 too.
>
> Thanks
>
> SV
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
> **NOTE: New CCNA/CCDA List has been formed. For more
> information go to
>
http://www.groupstudy.com/list/Associate-Announcement.html
> _________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associate-Announcement.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
