One of the things your carrier may require is the type after your DLCI
number. Contact your carrier and they will tell you what it should be. Do
you have external CSU's or using internal on the router?
For example:
interface Serial1.1 point-to-point
frame-relay interface-dlci 659 IETF
Your bgp config isn't going to work either. It's missing a few lines. Are
you planning on running BGP? If so, let me know and we can work on that
problem next.
John
----- Original Message -----
From: Yee, Jason <[EMAIL PROTECTED]>
To: cisco@groupstudy. com (E-mail) <[EMAIL PROTECTED]>
Sent: Tuesday, September 12, 2000 10:55 PM
Subject: line protocol down
>
> hi ,
>
> I have problems with my frame-relay serial link attatched is the router
> configuration
>
> physical layer confirmed is ok as carrier is up but my serial interface
> still showing interface up line protocol down
>
> Any inputs will be greatly appreciated
>
>
> thanks
>
> Jason
>
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
