Humm... a 2511 as a frame switch... I would use a 2511 for a terminal
server, and get a 4000 with a NP-4T for a frame switch. The 2611 would be
nice since it will hold a VIC, but so will a 1600 or 1700 for much less. Now
a 2620/21 with FE interfaces could be real handy for ISL/1.Q trunking.
$0.02
--
John Hardman, CCNP MCSE+I
"Dennis Laganiere" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I was spec-ing out a 2511 for my lab to emulate a Frame-Relay cloud and my
> sales guy is pushing a 2611 on me, as a newer box. I've always had a 2511
> in the classes I've taken, and most of the play-around labs I've seen have
> this box. Can somebody advise me on which chassis and blades to buy?
Keep
> in mind the only purpose for this unit is for the lab. Let me know. Thank
> you in advance for your fine advice and counsel...
> - Dennis
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
