This is the hangover from testing not the cause after loop back is disabled
the line protocol still show down
Jason
-----Original Message-----
From: Peter Simmons [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 19, 2000 1:27 PM
To: Yee, Jason; [EMAIL PROTECTED]
Subject: Re: link down problem
Jason,
(Lots of stuff snipped)
The output from "show int s0"
>Router#sh int s0
>Serial0 is up, line protocol is down (looped)
>Internet address is 202.161.128.158/30
shows the interface is looped at the CSU/DSU, doesn't it?
Is this just a hangover from testing, or is this the cause?
Regards
Pete S.
/DISCLAIMER
All the ususal legal rubbish means that if If your house burns down after
reading this, it's NOT my fault, OK!
/DISCLAIMER OFF
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]