Looks like LMI has not been activated on that line - check with your service
provider.

Cheers,

Si

"Peter Simmons" <[EMAIL PROTECTED]> wrote in message
02ae01c0221f$23cde300$020110ac@pii300">news:02ae01c0221f$23cde300$020110ac@pii300...
> Jason,
>
> I would suspect a FR service provider fault then. The status of "inactive"
> for the PVC indicates the problem lies downstream/upstream of this router.
>
> From Internetworking Troubleshooting Handbook p533 (Cisco Press)
>
> Frame Relay: Cannot ping Remote Router
> DLCI Inactive or deleted:
>
> Step 2: If the output from Step 1 (SHOW FRAME-RELAY PVC command) shows
that
> the PVC is deleted or inactive, there is a problem along the path to the
> remote router. Check the remote router or contact your carrier to check
the
> status ofthe PVC.
>
> Hope this helps
>
> Regards
>
> Pete S.
>
> /DISCLAIMER
> All the ususal legal rubbish means that if If your house burns down after
> reading this, it's NOT my fault, OK!
> /DISCLAIMER OFF
>
> -----Original Message-----
> From: Yee, Jason <[EMAIL PROTECTED]>
> To: 'Peter Simmons' <[EMAIL PROTECTED]>; [EMAIL PROTECTED]
> <[EMAIL PROTECTED]>
> Date: 19 September 2000 10:19
> Subject: RE: link down problem
>
>
> >This is the hangover from testing not the cause after loop back is
disabled
> >the line protocol still show down
> >
> >Jason
> >
> >-----Original Message-----
> >From: Peter Simmons [mailto:[EMAIL PROTECTED]]
> >Sent: Tuesday, September 19, 2000 1:27 PM
> >To: Yee, Jason; [EMAIL PROTECTED]
> >Subject: Re: link down problem
> >
> >
> >
> >Jason,
> >
> >(Lots of stuff snipped)
> >
> >The output from "show int s0"
> >
> >>Router#sh int s0
> >>Serial0 is up, line protocol is down (looped)
> >>Internet address is 202.161.128.158/30
> >
> >shows the interface is looped at the CSU/DSU, doesn't it?
> >
> >Is this just a hangover from testing, or is this the cause?
> >
> >Regards
> >
> >Pete S.
> >
> >/DISCLAIMER
> >All the ususal legal rubbish means that if If your house burns down after
> >reading this, it's NOT my fault, OK!
> >/DISCLAIMER OFF
> >
> >
> >
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to