Title: Cisco 3640 grunty enough for full-BGP routing?
Some ISPs offer full routing in two flavors: "as is" or a "summarized" version (maybe that's the case). Please don't ask any additional details because that was long long time ago...
-----Original Message-----
From: Guyler, Rik [EESUS] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 19, 2000 1:06 PM
To: John Kaberna; Cisco Groupstudy (E-mail)
Subject: RE: Cisco 3640 grunty enough for full-BGP routing?

I don't know the nuances involved, but he stated that the Internet routing table a year ago was over 70,000 routes and is probably closer to 90,000 routes right now.  Maybe you did not see the complete table when you saw 20MB?  I don't know...  Like I said, however, he is a 3xxx CCIE and a Cisco SE, so I find it hard to refute his word.  Not that I'm saying you are wrong, just that I find him to be extremely credible.
 
Rik
-----Original Message-----
From: John Kaberna [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 18, 2000 4:16 PM
To: Guyler, Rik [EESUS]; Jeff Wang; Cisco Groupstudy (E-mail)
Subject: Re: Cisco 3640 grunty enough for full-BGP routing?

The BGP routing table itself takes up less than 20MB of memory last time I checked (only a couple months ago).  I don't have access to a router running full BGP routes right this moment but someone should verify this.  I am fairly certain it is less than 20.  So, you can run it just fine on a 3640 with 128mb.  I completely disagree with this "experienced" CCIE.  However, his routers may have several other services running on them that use a lot of memory.  A 3640 with 128mb used simply as an Internet router running BGP will have no trouble now or in the near future.  Does anyone have a 3640 w/BGP that could provide some current stats?
 
John
----- Original Message -----
Sent: Monday, September 18, 2000 9:13 AM
Subject: RE: Cisco 3640 grunty enough for full-BGP routing?

A CCIE, experienced in the service provider market, just recently told me that a 3640 *might* be OK at first, but it would really be a strain to keep the entire routing table.  His reasoning is that 128MB RAM barely covers the requirements and will allow no room for growth.  He went on to say that if you can, use 256MB, 512MB, etc. as new routes that are added in the future will drive your memory requirements beyond 128MB.
 
Rik Guyler
-----Original Message-----
From: Jeff Wang [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 18, 2000 12:18 AM
To: [EMAIL PROTECTED]
Subject: Cisco 3640 grunty enough for full-BGP routing?

Hi all,

Just a quick question regarding 3640 with 128MB DRAM.  Will it be grunty enough to run full-BGP, talking to two different providers and getting full routes, with one E1 2Mbps WAN link to each provider?  What's your minimum configuration from experience?

TIA,

Jeff Wang

Reply via email to