If its new or under warranty call Cisco and get an RMA.  Otherwise you'll
have to buy a new one and xmodem an image on to it.

John

----- Original Message -----
From: Peter Gray <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 19, 2000 4:59 PM
Subject: Router Bootup Problem


> I have got a corrupt flash on my router. It goes to ROMMON after starting.
> IP doesn't start and it goes to same mood even if I change config-reg to
> 0x2101 . Its a 2600. See the startup message.
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> device does not contain a valid magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> device does not contain a valid magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> rommon 1 >
>
> Any comments!!!!!
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to