Unfortunatley, this won't work. The router is not saying there is no IOS it
is saying that either the flash is bad or that
it has not been partitioned. If you have an older flash for same router, put
it back into
the router in the first slot and the new flash into the second slot. When
the router finds the IOS on the old flash and boots, go into config mode and
partition the flash.
----- Original Message -----
From: "Evan Francen" <[EMAIL PROTECTED]>
To: "'Peter Gray'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, September 19, 2000 4:25 PM
Subject: RE: Router Bootup Problem
> Have you ever opened the case on this router before. Try reseating the
> flash memory module and copying an new flash image from tftp.
>
> Evan
>
> -----Original Message-----
> From: Peter Gray [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, September 19, 2000 6:59 PM
> To: [EMAIL PROTECTED]
> Subject: Router Bootup Problem
>
>
> I have got a corrupt flash on my router. It goes to ROMMON after starting.
> IP doesn't start and it goes to same mood even if I change config-reg to
> 0x2101 . Its a 2600. See the startup message.
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> device does not contain a valid magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> device does not contain a valid magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> rommon 1 >
>
> Any comments!!!!!
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
