Actually, I had this exact message this morning on a 2620.  This is what it
reports when there is no IOS present in FLASH.  In my case, I had just
upgraded from 8 to 16 MB of FLASH so, of course, there was no software
present.  Also, a 2600 has only one slot for FLASH.

>  Unfortunatley, this won't work. The router is not saying there is no IOS
it
>  is saying that either the flash is bad or that
>  it has not been partitioned. If you have an older flash for same router,
put
>  it back into
>  the router in the first slot and the new flash into the second slot. When
>  the router finds the IOS on the old flash and boots, go into config mode
and
>  partition the flash.
>  ----- Original Message -----
>  From: "Evan Francen" <[EMAIL PROTECTED]>
>  To: "'Peter Gray'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
>  Sent: Tuesday, September 19, 2000 4:25 PM
>  Subject: RE: Router Bootup Problem
>  
>  
>  > Have you ever opened the case on this router before.  Try reseating the
>  > flash memory module and copying an new flash image from tftp.
>  >
>  > Evan
>  >
>  > -----Original Message-----
>  > From: Peter Gray [mailto:[EMAIL PROTECTED]]
>  > Sent: Tuesday, September 19, 2000 6:59 PM
>  > To: [EMAIL PROTECTED]
>  > Subject: Router Bootup Problem
>  >
>  >
>  > I have got a corrupt flash on my router. It goes to ROMMON after
starting.
>  > IP doesn't start and it goes to same mood even if I change config-reg
to
>  > 0x2101 . Its a 2600. See the startup message.
>  >
>  > System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>  > Copyright (c) 1999 by cisco Systems, Inc.
>  > TAC:Home:SW:IOS:Specials for info
>  > C2600 platform with 24576 Kbytes of main memory
>  >
>  > device does not contain a valid magic number
>  > boot: cannot open "flash:"
>  > boot: cannot determine first file name on device "flash:"
>  >
>  > System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>  > Copyright (c) 1999 by cisco Systems, Inc.
>  > TAC:Home:SW:IOS:Specials for info
>  > C2600 platform with 24576 Kbytes of main memory
>  >
>  > device does not contain a valid magic number
>  > boot: cannot open "flash:"
>  > boot: cannot determine first file name on device "flash:"
>  >
>  > System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>  > Copyright (c) 1999 by cisco Systems, Inc.
>  > TAC:Home:SW:IOS:Specials for info
>  > C2600 platform with 24576 Kbytes of main memory
>  >
>  > rommon 1 >
>  >
>  > Any comments!!!!!
>  >
>  >
_________________________________________________________________________
>  > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
>  >
>  > Share information about yourself, create your own public profile at
>  > http://profiles.msn.com.
>  >
>  > **NOTE: New CCNA/CCDA List has been formed. For more information go to
>  > http://www.groupstudy.com/list/Associates.html
>  > _________________________________
>  > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>  > FAQ, list archives, and subscription info: http://www.groupstudy.com
>  > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>  >
>  > **NOTE: New CCNA/CCDA List has been formed. For more information go to
>  > http://www.groupstudy.com/list/Associates.html
>  > _________________________________
>  > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>  > FAQ, list archives, and subscription info: http://www.groupstudy.com
>  > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>  >
>  
>  **NOTE: New CCNA/CCDA List has been formed. For more information go to
>  http://www.groupstudy.com/list/Associates.html
>  _________________________________
>  UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>  FAQ, list archives, and subscription info: http://www.groupstudy.com
>  Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]





_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html

**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to