Nope. Besides that would be contrary to good security policy.
Rodgers Moore
""Cthulu, CCIE Candidate"" <[EMAIL PROTECTED]> wrote in message
8qb0n2$cip$[EMAIL PROTECTED]">news:8qb0n2$cip$[EMAIL PROTECTED]...
> Hi, all,
>
> Sorry for the cutesy subject header. I just got aholt of a Pix firewall;
t
> was laying the office and I stumbled over it on my way to the vending
> machine to pick up some Oreos. After I ate my Oreos (a little stale,
thanks
> for asking), I realized that this was a Pix firewall! I am 100% new to
the
> PIX, but that's irrelevant...
>
> I immediately put it on our network like this:
>
> My laptop <-----> Ethernet 1 PIX Firewall Ethernet 0 <------->Catalyst
> 2900XL
>
> Anyways, I am going to learn it, adn learn it good. My question is: can
I
> set up any of the interfaces to dynamically acquire an IP address via
DHCP?
> I want ehternet 0 to acquire an IP address from our DHCP server.
>
> If the PIX supports it, I will put a DHCP server on it to service my
laptop
> on ethernet 1. if it doesn't I am going to statically assign an IP
address
> to teh laptop and to ethernet 1, and run NAT to translate between
> inside/outside addresses.
>
> What am I trying to accomplish? Nothing, just a learning experience for
me.
> Time to upgrade the image!
>
>
> TIA,
>
> Charles
>
>
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
