I don't think you can confiure a 10BaseT port on a router to hand ISL Encapsulation (and dot1q?). Kenneth ""Gabriel"" <[EMAIL PROTECTED]> wrote in message 8qdnuj$f1t$[EMAIL PROTECTED]">news:8qdnuj$f1t$[EMAIL PROTECTED]... > > <[EMAIL PROTECTED]> wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi. > > > > I have to connect a Catalyst 2900XL with several VLAN?s defined to a > > router, for routing goals between them. > > However I want to connect only one port in the switch (trunk port with ISL > > or dot1q) to only one ethernet port in the router, making subinterfaces. > > > > Does anyone knows what Version of IOS must be running in the router or > what > > kind of router (model) or card supports the frame tagging for this issue. > > I know that "Inter-VLAN routing" is *not* supported in the IP Only feature > set, and that it *is* supported in the Enterprise feature set for most of > the low-to-mid grade routers. Not sure about IP Plus, Desktop, or other > medium-feature grades. > > -Gabriel > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]