Kenneth Lorenzo wrote:
>
> I don't think you can confiure a 10BaseT port on a router to hand
> ISL Encapsulation (and dot1q?).
True, 10Mb ports don't do trunking at all.
> ""Gabriel"" <[EMAIL PROTECTED]> wrote...
> > <[EMAIL PROTECTED]> wrote in message...
> > > I have to connect a Catalyst 2900XL with several VLAN?s defined
> > > to a router, for routing goals between them. However I want to
> > > connect only one port in the switch (trunk port with ISL
> > > or dot1q) to only one ethernet port in the router, making
> > > subinterfaces.
Not supported on older 4Mb RAM 2900XLs, but works on newer 8Mb ones,
if your router port is 100Mb or 10/100TX.
> > I know that "Inter-VLAN routing" is *not* supported in the IP Only
> > feature set, and that it *is* supported in the Enterprise feature
> > set for most of the low-to-mid grade routers. Not sure about IP
> > Plus, Desktop, or other medium-feature grades.
The "Plus" images have ISL/VLAN support, and also routed NAT. It
started around an 11.2T release as best as I recall. Somewhere around
12.x they included dot1q.
Jeff Kell <[EMAIL PROTECTED]>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
