If I read your message correctly, you have:
Internal Routers(2) Area 1 ABR Area0 ABR Area 2 Internal Routers(2)
A router in area 1 now has a link to area 2 (in other words, it has an
interface in area 1 and 2).
What you want will happen automatically. Remember that OSPF enabled routers
have a complete picture of the network with themselves as the chewy creamy
center. If a link goes down, that Dij algorithm gets recalculated, and
voila, a new picture of the network, with the failed link kicked aside.
Did I understand your question correctly? If not, let me know.
HTH,
Charles
"vasu" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Greetings,
> Guys
> I am little bit confused with OSPF Configuration. Please help me
> out.
> 1. Just imagine that i need 3 area's to be configured including area
> 0.
> 2. Assume that i have 2 routers in area 0
> and Area 1 and Area 2 are having 2 routers each.
> 3. Just imagine one of the router which was in area 1 gets new
> link and that to
> be connceted to area 2 for fault tolerance. That means i want
> the serial link which was only in area 1 to be functional by default
> and suppose if the link which is configured in area 1 fails the router
> should take area 2 link.
> 4. All these areas are interconnected via serial links.
>
> Hope this is sufficient to get the best solution
> This is the problem what i am facing. Help me out.
>
> Atul
>
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]