Thanks for your post as well as others..........
I have since got it working.
And it's hard to say why. I asked a co-worker who had used this lab before
to suggest things. We essentially wiped all the configs and started from
scratch.
It worked on the first attempt. (but I did that! - twice!!)
I was successful in getting vc's to work using the "old" way - using
map-list statements and the "new" way - using sub-interfaces.
I danced all around this and I'd swear that I had the same config at one
time or another - really, well - maybe not.
thanks to the list for suggestions.
Kevin Wigle
----- Original Message -----
From: "sdonoho" <[EMAIL PROTECTED]>
To: "cisco" <[EMAIL PROTECTED]>
Sent: Tuesday, September 26, 2000 4:50 PM
Subject: RE: ATM Config
> Kevin,
> Not sure with out seeing your config but try mapping the destination
> address of the PVC:
>
> int ATM2/1
> ip address 220.1.1.1 255.255.255.0
> atm pvc 10 0 32 aal5snap
> map-group trythis
> !
> map-list trythis
> ip 220.1.1.2 atm-vc 10
>
>
> -Scott
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
