The answer is, every Cisco switch implements it differently. Try this link,
it gives a basic explanation of each switch's method.
http://www.cisco.com/warp/public/784/packet/july98/12.html
Steve
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
FRS
Sent: Wednesday, September 27, 2000 6:55 PM
To: [EMAIL PROTECTED]
Subject: LAYER 3 SWITCHING
I need some help in understanding Layer 3 Switching.
1. What does the process Layer 3 switching refer to?
2. Is it packets or frames being switched out of interfaces or ports?
3. Using the 2948G-L3 as an example, how is the switching determined - by
Routing table or CAM table?
All help is appreciated.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
