hi,
I am wondering if I could use this clear ip bgp * if I encounter bgp
flapping due to serial down for a while and then up again . This is because
my bgp is fully functionally receiving all the routes only after a few hours
after my serial went down and up again for 2 minutes
Jason
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
whatshakin
Sent: Monday, October 02, 2000 2:08 AM
To: [EMAIL PROTECTED]
Subject: Re: route table
clear ip bgp *
Don't do this on a production network during business hours!
----- Original Message -----
From: Raymond Mak <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Sunday, October 01, 2000 9:47 AM
Subject: route table
> Hi,
>
> Would you tell me how to flush the bgp routing table to make it learn
> again?
>
> Thanks
>
> Regards,
> Raymond
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
