Paul,
If you haven't upgraded Hyperterm, then you should. Hyperterm straight off
the CD has a bug in it. I bet you can guess what that bug is....
Rodgers Moore
"Paul Werner" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> > Robert McIntire wrote:
> > I'm working with a used 2514 router with an unknown enable
> password. I've tried the standard break technique but can't
> abort the boot sequence. I believe that break may be
> disabled. I'm using Win NT 4 and hyperterminal to connect to
> the console port and am able to connect and SHOW VERSION. I am
> getting terminal feedback. I've used CTRL-BREAK AND CTRL-SHFT-
> 6 to no avail. How can I access ROMMON mode and change the
> password?
>
> > Is there a jumper on the system board that can be used to
> circumvent the password and access the router for configuration?
>
> > Any advice is appreciated, Thanks
>
> The version of hyperterm that ships with NT4 is version 2.0.
> It is not capable of sending a break to the router. I would
> recommend that you go the following web site to get a newer
> version of hyperterm.
>
> www.hilgraeve.com
>
> I use version 4.0 (Private edition), and it works fine.
>
> HTH,
>
> Paul Werner
>
>
> ________________________________________________
> Get your own "800" number - Free
> Free voicemail, fax, email, and a lot more
> http://www.ureach.com/reg/tag
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
