These commands are CLI based right? The command to statically configure
ports to a vlan should be
switch (config)# interface <module_number>/port_number
switch (config-if)#vlan-membership static <vlan_number>
I say should be because I'm reading it out of a book. I passed the switching
test by memorizing the material. Unfortunately, I don't get to work on
switches too often.
I hope this works for you!
>>>Brian
>From: "alex campbell" <[EMAIL PROTECTED]>
>Reply-To: "alex campbell" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: 3548 vlan configuration
>Date: Thu, 12 Oct 2000 17:48:09 GMT
>
>Hi
>
>Just a quick question, I have a brand new 3548 xl switch. I have set up
>trunking between this and my catalyst 5500s. (I have 2 cat 5500s already
>set
>up with isl, and each 5500 can see all 10 vlans)
>the 3548 can now see the vlans as well..
>all well and good, except the commands to set ports to a specific vlan on
>my
>cat 5500s i.e. set vlan 1 4/5 (or whatever) dont work on this 3548, which i
>know uses a different ios.
>could someone please tell me how to configure a port on the 3548 so that it
>is on a different vlan that is on the default...
>set vlan does not work.
>regards
>mark
>
>_________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>Share information about yourself, create your own public profile at
>http://profiles.msn.com.
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
