Hi,
if you want to do it via command line you must go to each port and give the
command "switch-port access vlan xxx". Otherwise you can do it via HTTP
management.
Regards
Elias Poulias
CCNP
""alex campbell"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
>
> Just a quick question, I have a brand new 3548 xl switch. I have set up
> trunking between this and my catalyst 5500s. (I have 2 cat 5500s already
set
> up with isl, and each 5500 can see all 10 vlans)
> the 3548 can now see the vlans as well..
> all well and good, except the commands to set ports to a specific vlan on
my
> cat 5500s i.e. set vlan 1 4/5 (or whatever) dont work on this 3548, which
i
> know uses a different ios.
> could someone please tell me how to configure a port on the 3548 so that
it
> is on a different vlan that is on the default...
> set vlan does not work.
> regards
> mark
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
