If your router has a valid image in flash, check to make sure your config
register is set to 0x2102. If not you will have to re-set it to 0x2102.
This will tell the router to boot from an image stored in flash...
Chris Lemagie
Systems Engineer
Cisco Systems
Seattle Commercial Region
(425) 468-0959
[EMAIL PROTECTED]
http://www.cisco.com/
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Brian Lodwick
Sent: Friday, October 13, 2000 5:00 AM
To: [EMAIL PROTECTED]
Subject: (boot) mode?
Hello everyone,
I was wondering if anyone has come across a router where the hostname
showed up as such:
Router(boot)#
one of my peers has told me this means the router did not fully boot up. Is
this true? Boot mode is what he called it. Any help is much appreciated in
advance.
>>>Brian
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
