These are not configs. Send the router configs. Someone in the group did bring out
doubtfuly though, " Proxy ARP "
Pull the configs of the router. I am sure we will be able to figure it out.
Well, do u have access to the remote router ?
-----Original Message-----
From: Bharat Suneja [EMAIL PROTECTED]
Sent: Sun, 15 Oct 2000 22:30:00 -0700
To: [EMAIL PROTECTED]
Subject: Re: HSRP Lab... :-(...u need a break dude
Pradeep,
Here is the config :
E0 of router B is on the same segment. Here is the IP config :
Router A:
E0 - 192.1.1.1, 255.255.255.0
S0 - 192.3.1.1, 255.255.255.0
Router B:
E0 - 192.1.1.2, 255.255.255.0
S0 - 192.2.1.1, 255.255.255.0
Local PC: 192.1.1.20, 255.255.255.0, Default Gateway 192.1.1.1
Router C:
S0 - 192.3.1.2, 255.255.255.0 (is connected to S0 of Router A)
S1 - 192.2.1.2, 255.255.255.0 (is connected to S0 of Router B)
E0 - 192.4.1.1, 255.255.255.0 (is connected to Remote PC)
Remote PC: 192.4.1.20, 255.255.255.0, Default Gateway 192.4.1.1 (Router C)
Router A, Router B & Local PC are connected to a hub.
Makes sense... ???
Bharat
""Pradeep Kumar"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Bharat,
> I think you are still working the night shifts and need a break.
>
> PC on remote router WILL NOT be able to "talk to " the Win 95 client
connected to the hub. Period.
>
> If HSRP is not configured
> And If
> There is one and only one ( Router A ) default gateway configured
> And if
> There is no entry of Router B interface as gateway 2 ( multiple gateways
for one client is possible)
> Then
> Win 95 will not talk to remote PC
> But if
> Win 95 configured with D/G -II = Router B E0,
> Then
> They will
> Else if HSRP
> end if
>
> Hope that helps.It will
>
>
>
>
> -----Original Message-----
> From: Bharat Suneja [EMAIL PROTECTED]
> Sent: Thu, 21 Sep 2000 15:52:59 -0700
> To: [EMAIL PROTECTED]
> Subject: HSRP Lab... :-(
>
>
> Hi all,
>
> I was doing a HSRP lab. Two routers have their E0 connected to hub. A
Win95
> PC is also connected to the hub. S0 of both routers connected to a remote
> router with a PC on E0 of remote router. Routing Protocol: EIGRP.
>
> Now, before configuring HSRP on the local routers, if I disconnect E0 on
> Router A from the hub, the PC connected to the hub should not be able to
> forward packets because its default gateway (Router A) is down.
>
> However, I find that the PC can still communicate with the remote
network -
> the second router (Router B) forwards the packets!! This is something I
> didn't know before - and the OS on the PC is Windows 95!!!
>
> My questions:
> 1. Is this a Win95 feature ??? (doubtful as it sounds!!)
> 2. Is this something to do with RDP ???
> 3. Is this something to do with ARP ??? (PC broadcasts for default gateway
> and Router B replies when router A is down??).
>
> If 2 and 3 are true, what's the purpose of HSRP ???
>
> Thanks in advance,
>
> Bharat Suneja
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
>
___________________________________________________________________________
> Visit http://www.visto.com/info, your free web-based communications
center.
> Visto.com. Life on the Dot.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________________________________________________
Visit http://www.visto.com/info, your free web-based communications center.
Visto.com. Life on the Dot.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]