take it outside.
----- Original Message -----
From: "Jojo" <[EMAIL PROTECTED]>
To: "Ben" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, October 17, 2000 9:36 AM
Subject: Re: cross-over roll-over : Here is THE simplest rule
> I dont know with you but I can connect my workstation directly to a modem
> Ever heard of a serial port? The reason that you can connect a
workstaion
> to a LAN devices is that it has LAN device which is the NIC card. And
dont
> ever tell us that a workstaion is a layer 3 devices cause its not . Does
a
> workstation ever do routing? Its not even a layer 4, 5, 6, or 7 by
itself.
> But if you put in the software or hardware that will enable it to do this
> things then it can be any of these.
>
>
> >Hmmmm, let me think. I never thought of that, that someday we will be
> >connecting a workstation to a modem with a Cat5 cable.
> >Workstation to a modem, ? no the rule does not apply
> >How about a TV to a VCR? no, it does not apply neither.
> >How about the toaster? nooope.
> >
> >You are right, that is not a good rule. Don't use it.
> >
> >Bernard
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
