Scott Meyer wrote:
> I am trying to get a VPN working. Clients dial into a ISP, use Cisco's VPN
> client to connect to a 3640 router. I can ping by IP address to my hearts
> content and everything responds.
>
> However, we can't login to a Novell 4 server running IP. What do I need to
> enable to allow login? I don't know enough about the login process for a
> Novell server running IP.
>
> I would appreciate a nudge in the right direction.
>
> Scott Meyer
> CCNA, CCDA, MCSE, etc
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Novell 4 servers have become extremely rare. I am not even sure if Netware IP will run
on them. I will assume you are talking about a Novell 4.11 server.
Start troubleshooting from the server side. From the server console (SERVERNAME:
prompt)
ping a known good IP address and see what you get. The command is a simple "ping
xxx.xxx.xxx.xxx".
Netware IP is buggy and difficult to troubleshoot. If you get a response by pinging
then
e-mail me and I will run a few queries on my database and see if the problem can be
narrowed down.
Bert Sainz
CNE, MCP
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
