I had a tough enough time getting a Netware 5 VPN connection working.
Netware/IP is pretty difficult to work with. Are you sure the clients are
connecting via Netware/IP to the server with no IPX dependicies from the
client side?
Keith
MCSE, CNE, CCNA
""Freddy Wildemeersch"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Scott,
>
> You can't login to a NetWare 4 server using IP only unless you have
> NetWare/IP installed on the server and the client.
> If the router permits use IPX or upgrade towards NetWare 5.
>
> Freddy Wildemeersch
>
>
> -----Oorspronkelijk bericht-----
> Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Namens Scott
> Meyer
> Verzonden: donderdag 26 oktober 2000 19:46
> Aan: Cisco
> Onderwerp: Novell VPN
>
>
> I am trying to get a VPN working. Clients dial into a ISP, use Cisco's VPN
> client to connect to a 3640 router. I can ping by IP address to my hearts
> content and everything responds.
>
> However, we can't login to a Novell 4 server running IP. What do I need to
> enable to allow login? I don't know enough about the login process for a
> Novell server running IP.
>
> I would appreciate a nudge in the right direction.
>
> Scott Meyer
> CCNA, CCDA, MCSE, etc
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
