I would try setting the Aux port speed to 28800 instead of 115200. That's
all I can see.
Will
""Suzi Beavis"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am trying to set up a modem to dial into the AUX port of a Cisco2610
> router for remote support. I am using HyperTerminal on the PC and I have
> set up a reverse telnet session into the modem (3 Com U.S Robotics - 56K
fax
> modem) connected to the AUX port. The modems seem to connect correctly
but
> I am unable to see EXEC mode on the router. While connected I can send
> text from the HyperTerminal to the reverse telnet session into the
router -
> BUT I can not see EXEC mode on the router. I have tried different
routers
> and about 3 different modems (along with numerous AT strings) - but no
> success. After the two modems have connected, I get the following message
> on HyperTerminal
>
> CONNECT 28800/V42BIS
>
> That's about it! Any text I type into the HyperTerminal can be see on the
> reverse telnet session and vice versa.
>
> The router config is below:
>
> hostname Router
> !
> ip subnet-zero
> ip host aux 2065 1.1.1.1
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.255
> !
> interface Ethernet0/0
> no ip address
> shutdown
> !
> interface Serial0/0
> no ip address
> shutdown
> !
> !
> line con 0
> transport input none
> line aux 0
> password cisco
> login
> modem Dialin
> modem autoconfigure type usr_sportster
> transport input all
> stopbits 1
> speed 115200
> flowcontrol hardware
> line vty 0 4
> login
> !
> no scheduler allocate
> end
>
>
> Has any one else out there experienced the same problem - I am missing
> something?
> Any help would be much appreciated.
>
> Cheers,
> Suzi
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
