Mmm. config looks OK, try debug confmodem on the router to ensure
autoconfigure is working OK ?
"Suzi Beavis" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am trying to achieve option A.
>
> A) remote dial-in for Exec session only to this router (no ppp)
>
> I have tried to lower the speed on the modem/router to 9600 hoping this
may
> help, and I have tried several different modems and played around with AT
> strings galore. I give up!!
>
> This would at first appear to be a simple problem - but it is surprising
> just how many people have emailed me regarding this exact problem!
>
> That is:
> No EXEC prompt. You can send text between hyperterminal (local PC) and
> reverse telnet session (remote router). (I have tried using Tera Term
Pro
> as suggested in earlier group study emails.)
>
> Good luck to those people with this problem - if you manage to work it out
> please let me/us know.
>
> Cheers,
> Suzi.
>
> --------------------------------------------------------------------
>
> What are you trying to achieve:
>
> A) remote dial-in for Exec session only to this router (no ppp)
>
> or
>
> B) remote dial-in for PPP session which will allow Telnet, ping onto and
> via the router in question ?
>
> Once I know a) or b) I can advise why your config is wrong.
>
> Regards,
> Bill
>
>
> "Suzi Beavis" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >I am trying to set up a modem to dial into the AUX port of a Cisco2610
> >router for remote support. I am using HyperTerminal on the PC and I have
> >set up a reverse telnet session into the modem (3 Com U.S Robotics - 56K
> fax
> >modem) connected to the AUX port. The modems seem to connect correctly
> but
> >I am unable to see EXEC mode on the router. While connected I can send
> >text from the HyperTerminal to the reverse telnet session into the
> router -
> >BUT I can not see EXEC mode on the router. I have tried different
> routers
> >and about 3 different modems (along with numerous AT strings) - but no
> >success. After the two modems have connected, I get the following
message
> >on HyperTerminal
> >
> >CONNECT 28800/V42BIS
> >
> >That's about it! Any text I type into the HyperTerminal can be see on
the
> >reverse telnet session and vice versa.
> >
> >The router config is below:
> >
> >hostname Router
> >!
> >ip subnet-zero
> >ip host aux 2065 1.1.1.1
> >!
> >interface Loopback0
> >ip address 1.1.1.1 255.255.255.255
> >!
> >interface Ethernet0/0
> >no ip address
> >shutdown
> >!
> >interface Serial0/0
> >no ip address
> >shutdown
> >!
> >!
> >line con 0
> >transport input none
> >line aux 0
> >password cisco
> >login
> >modem Dialin
> >modem autoconfigure type usr_sportster
> >transport input all
> >stopbits 1
> >speed 115200
> >flowcontrol hardware
> >line vty 0 4
> >login
> >!
> >no scheduler allocate
> >end
> >
> >
> >Has any one else out there experienced the same problem - I am missing
> >something?
> >Any help would be much appreciated.
> >
> >Cheers,
> >Suzi
> >
> >_________________________________________________________________________
> >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> >
> >Share information about yourself, create your own public profile at
> >http://profiles.msn.com.
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
