I've had tried that method before, however it doesn't work, beside Netbios
port (139), NT must be using different port to communicate between PDC &
BDC. Couldn't figured out which other port NT using.
Here is my layout (didn't work hehe):
PDC (Public IP)
|
|
Internet Cloud
|
|
Router with NAT (with static map port 135, 138, 139)
|
|
BDC (PrivateIP)
Let me know if you have solution. Thanks
----- Original Message -----
From: "Jim Bond" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 03, 2000 11:24 AM
Subject: NAT again --- tough
> Hello,
>
> My problem is this: remote site has only 1 public ip
> address, I use cisco 4000 do NAT overload. I have to
> put a BDC at remote site so users can log on locally.
> I forward tcp/udp port 139 to the BDC but BDC still
> can't replicate with PDC. Any suggestion?
>
> Here is what I did:
> ip nat inside source static tcp 10.1.1.20 139
> 204.192.3.46 139 extendable
> ip nat inside source static udp 10.1.1.20 139
> 204.192.3.46 139 extendable
>
> Thanks in advance.
>
>
> Jim
>
> __________________________________________________
> Do You Yahoo!?
> From homework help to love advice, Yahoo! Experts has your answer.
> http://experts.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
