You're not logging out of the first connection, therefore, the terminal line
is in use when you try to log in again. Use the command "sh user" to show
current line connections. You will see a user on the async line, use the
command "clear line <line number>" to reset the connection.
Erik Mintz
Domestic Field Engineering Manager
Mail.com
[EMAIL PROTECTED]
----- Original Message -----
From: "Manishkumar Patel" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 03, 2000 5:15 PM
Subject: Terminal server not able to Reverse Telnet
| Dear All,
| Hi!
| I have setup 2511 as Terminal Server, with the Octal RJ-45 cables
connected to
| Console port of 4 2500 Routers. During a day the reverse Telnet works
fine,
| but when I try to Telnet on next day morning, it says " CONNECTION
REFUSED",
| What can be the Problem & solution?
|
| It works fine after Rebooting the Terminal Server.
| Your help will be appreciated.
| Thanks in advance...Have a nice weekend.
| Regards
| MK
| Andre Fecteau <[EMAIL PROTECTED]> wrote:
|
| > ---------------------------------------------
| > Attachment:
| > MIME Type: multipart/alternative
| > ---------------------------------------------
| > I configured some routers for ISDN, but one of the spids is coming up
| > invalid can anyone tell me why? I put the BRI configurations for both
| > sides as well as the error message that I'm getting. Can someone help
| > me fix this problem? By the way I called the service provider and they
| > said everything is OK regarding the ISDN lines and spids. I can telnet
| > and other things, but I just can't get both channels to come up at the
| > same time. And obviously at least from my limited knowledge base the
| > invalid spid has something to do with that! I've been pulling my hair
| > out over this one for a few days! I'd like a solution, but all
| > suggestions are more than welcome!!!!!!!
| >
| > Both side have this:
| > isdn switch-type basic-ni
| > isdn voice-call-failure 0
| > isdn tei-negotiation first-call
| >
| > One side
| > interface BRI1/1
| > ip address x.x.x.x x.x.x.x
| > ip nat inside
| > encapsulation ppp
| > dialer map ip y.y.y.y name y broadcast yyyyyyy(first #)
| > dialer map ip y.y.y.y name y broadcast yyyyyyy(second #)
| > dialer load-threshold 10 either
| > dialer-group 1
| > isdn switch-type basic-ni
| > isdn spid1 xxxxxxxxxxxxxx xxxxxxx
| > isdn spid2 xxxxxxxxxxxxxx xxxxxxx
| > ppp authentication chap
| > ppp multilink
| > !
| >
| > Other side:
| > !
| > interface BRI1/0
| > ip address y.y.y.y y.y.y.y
| > encapsulation ppp
| > dialer map ip x.x.x.x name x broadcast xxxxxxx(first #)
| > dialer map ip x.x.x.x name x broadcast xxxxxxx(second #)
| > dialer load-threshold 1 outbound
| > dialer-group 1
| > isdn switch-type basic-ni
| > isdn spid1 yyyyyyyyyyyyyy yyyyyyy
| > isdn spid2 yyyyyyyyyyyyyy yyyyyyy
| > ppp authentication chap
| > ppp multilink
| > !
| >
| > This is the ISDN status : The other side is the same except both spids
| > are valid!
| > Global ISDN Switchtype = basic-ni
| > ISDN BRI1/0 interface
| > dsl 8, interface ISDN Switchtype = basic-ni
| > Layer 1 Status:
| > ACTIVE
| > Layer 2 Status:
| > TEI = 73, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
| > TEI = 74, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
| > TEI 73, ces = 1, state = 5(init)
| > spid1 configured, spid1 NOT sent, spid1 valid
| > Endpoint ID Info: epsf = 0, usid = 40, tid = 1
| > TEI 74, ces = 2, state = 4(await init)
| > spid2 configured, spid2 sent, spid2 NOT valid
| > Layer 3 Status:
| > 0 Active Layer 3 Call(s)
| > Activated dsl 8 CCBs = 0
| > The Free Channel Mask: 0x80000003
| >
| > Help!
| > Andre
| >
| >
| > --
| > Andre Fecteau
| > Unix Software Engineer
| > [EMAIL PROTECTED]
| > CNE3, 4 & CCNA
| >
|
|
| ____________________________________________________________________
| Get free email and a permanent address at http://www.netaddress.com/?N=1
|
| _________________________________
| FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
| Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
|
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
