ya know - CCO still is the best.
The dual serial port WIC-2T and WIC-2A/S provide higher levels of serial
port density for a single WAN interface card and are supported on the Cisco
2600 and 1720 series. The WIC-2T supports speeds of up to a maximum port
speed of 2.048 Mbps. The low serial speed WIC-2A/S supports up to 128Kbps
synchronous or 115.2 Kbps asynchronous serial links. Each port can be
configured independent of the other allowing support for different physical
interfaces (protocol and DTE/DCE). Both cards support mixed asynchronous and
synchronous operation on a single card as well.
These dual-serial port WAN interface cards feature Cisco`s new, compact,
Smart Serial connectors to support a wide variety of electrical interfaces
when used with the appropriate transition cable. This includes: V.35,
RS-232, RS-449, RS-530, RS-530A in male and female versions for both DCE and
DTE devices. This feature provides easy configuration and re-configuration
as network requirements change without the need of purchasing a different
serial interface card.
Two cables are required to support the two ports on the WIC.
Hardware Specifications
The WIC-2T and WIC-A/S are supported on the Cisco 3600 (on the NM-1FE2W,
NM-2FE-2W, NM-2W, and the NM-1FE1R2W network modules), 2600 and 1720 series.
Cables: Cisco Smart Serial cable support includes:
CAB-SS-V35 MT/FC
CAB-SS-232 MT/FC
CAB-SS-449 MT/FC
CAB-SS-X21 MT/FC
CAB-SS-530 MT
CAB-SS-530A MT
The WIC-1T features the Cisco 5 in 1 connector which supports several serial
protocols (V.35, X.21, RS-232, RS-449, RS-530) when used with the
appropriate transition cable. This facilitates easy configuration and
re-configuration as network requirements change without the need to purchase
a different serial interface card.
Note: When used in a Cisco 1720 and 1600 series router, the WIC-1T may also
be operated in asynchronous mode. The WIC-1T is not supported in
asynchronous mode when used in the Cisco 2600 and 3600 series.
Cables: Cisco 5-in-1 (60 pin) cable support includes
CAB-V35 MT/FC
CAB-232 MT/FC
CAB-449 MT/FC
CAB-X21 MT/FC
CAB-530 MT
Kevin Wigle
----- Original Message -----
From: "Hennen, David" <[EMAIL PROTECTED]>
To: "'Frank Wells'" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, November 09, 2000 3:28 PM
Subject: RE: WIC 2T module question
> the WIC-2T has two little tiny ports called smart serial ports. The
WIC-1T
> has a regular db60 like on a 2500, I don't think they could fit two of
those
> on a WIC
>
> daveh
>
> -----Original Message-----
> From: Frank Wells [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, November 09, 2000 2:30 PM
> To: [EMAIL PROTECTED]
> Subject: WIC 2T module question
>
>
> Do the WIC 1T and 2T modular cards for the 2600/3600 routers have db 60
> sync/async ports just like a 2500 series router?
>
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
h11496.gif
h7212.gif
h11496.gif
h7212.gif
