Per port setting due to the problems it can lead to with loops (as you're
basically killing STP on that port). I have a text file that I just cut and
paste whenever I'm setting up a new 2900.
--
Jason Roysdon, CCNA, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
"Ole Drews Jensen" <[EMAIL PROTECTED]> wrote in message
2019FB428FD3D311893700508B71EBFB426138@RWR_MAIL_SVR">news:2019FB428FD3D311893700508B71EBFB426138@RWR_MAIL_SVR...
> Due to some problems I have with IPX communication from older NW Clients,
I
> had to enable PortFast on many of my ports, but I had to go in and do it
for
> each port:
>
> Elvis-1(config)#int fa 0/1
> Elvis-1(config-if)#span portfast
> Elvis-1(config-if)#int fa 0/2
> Elvis-1(config-if)#span portfast
> Elvis-1(config-if)#int fa 0/3
> Elvis-1(config-if)#span portfast
>
> etc...
>
> Is there a way to do it for a group of ports in one command?
>
> BTW, if anyone of you have been or are in the same situation, I can tell
you
> that by upgrading their NW Client to 3.30, the problem disappears - I just
> haven't had the chance to do it on all my workstations yet.
>
> The newest NW Client can be found here :
> http://www.novell.com/download/index.html
>
> Thanks,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> http://www.oledrews.com/ccnp
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
