There's your problem. Just use one roll cable. What you're winding up
doing is flipping the cable twice, making it just a straight-through
connection.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Tai Ngo
Sent: Tuesday, November 21, 2000 12:59 PM
To: '[EMAIL PROTECTED]'
Subject: Patch Panel and Cisco 2511
Hi All,
I have setup console access to my routers via the Cisco RJ-2511 router.
Everything works fine if all my routers are in the same room as my
console
server. However, I am having problems getting it to work across patch
panels. I connect the roll cable from my router console port to the
patch
panel which connects to a patch panel in my server room. I then connect
another roll cable from the server room's patch panel to the console
server.
When I try to telnet into the port, it just sits there. I have tested
all
the roll cables and the patch panel ports to make sure they work. Have
I
left something out?
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
