I have had similar issues with different rev levels of IOS. I know that
12.07T works and 12.14 does not.
""Waqar M"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Dave,
> I have got IOS versions 12.0(3)T3 on Cisco 1720 and 12.0(9) on Cisco 2520.
>
> Waqar
>
>
> >From: [EMAIL PROTECTED]
> >To: "Waqar M" <[EMAIL PROTECTED]>
> >Subject: Re: Async Dialing Issue
> >Date: Mon, 20 Nov 2000 08:59:12 +0000
> >
> >Hi Waqar
> > I had a similar problem with a pair of 3640's. The solution was an
> >IOS
> >upgrade.
> >
> >Hope this helps
> >
> >
> >Dave
> >
> >
> >
> >
> > "Waqar M"
> > <waqar_76@hot To: [EMAIL PROTECTED]
> > mail.com> cc: [EMAIL PROTECTED]
> > Sent by: Subject: Async Dialing
Issue
> > nobody@groups
> > tudy.com
> >
> >
> > 20/11/2000
> > 17:57
> > Please
> > respond to
> > "Waqar M"
> >
> >
> >
> >
> >
> >
> >Dear All, i m facing an issue here:
> >
> >I have a Cisco 2520 and cisco 1720 routers for async dial backup
> >connectivity. On Cisco 1720, i am using aux port for dialing out and on
> >cisco 2520, i m using the Sync/Async port for accepting incoming
connectons
> >and consequently i have configured it accordingly. But async port is not
> >accepting calls. As soon as call comes in, it disconencts it by giving
> >timeout signal in "debugging ppp negotiation". I have tried each and
every
> >step but the problem is recurring. Kindly help me regarding this issue.
> >Moreover, the line is working fine using AUX port as incoming connection,
> >so
> >this means that modems are OK.
> >
> >The configuration of Cisco 1720 is:
> >interface Async5
> >ip address 5.5.5.4 255.0.0.0
> >no ip directed-broadcast
> >encapsulation ppp
> >dialer in-band
> >dialer string 4313052
> >no cdp enable
> >
> >line aux 0line aux 0
> >modem InOut
> >transport input all
> >stopbits 1
> >speed 115200
> >
> >The Configuration of Cisco 2520 is:
> >
> >interface Serial3
> >physical-layer async
> >ip address 5.5.5.5 255.0.0.0
> >no ip directed-broadcast
> >encapsulation ppp
> >async default routing
> >async mode dedicated
> >no peer default ip address
> >
> >line 3
> >modem InOut
> >transport input all
> >speed 115200
> >stopbits 1
> >flowcontrol hardware
> >
> >Any sort of help will be highly appreciated.
> >
> >Waqar
> >
> >
> >_________________________________________________________________________
> >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> >
> >Share information about yourself, create your own public profile at
> >http://profiles.msn.com.
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
