If they are the old LattisNet hubs they may have been out before the actuall UTP
standards in 1990 or so. These had some funny quirks.
Teunis,
Hobart, Tasmania
Australia
On Thursday, December 07, 2000 at 12:00:22 PM, Benjamin Walling wrote:
> I've never had the little button/switch work on a 3Com. I've always had to
> use a crossover.
>
> "Herold Heiko" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Happened to me before, connecting old 10mbit noname hubs to 3com
> > officeconnect ones. the switch on the 3coms did not work with those,
> > only a crosscable did work. Never discovered why, although obviously
> > those old hubs were blamed :)
> >
> > Heiko
>
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
