Can you send us configuration example, what model of cisco router are you
using????????
thanks
Julio Garcia
On Thu, 7 Dec 2000, David Wolsefer wrote:
> This is typical behavior for the basic-net3 switch. You won't see active
> until the call is placed, then everything will be normal.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Raul F. Fernandez
> Sent: Thursday, December 07, 2000 9:20 AM
> To: [EMAIL PROTECTED]
> Subject: ISDN Switch Type basic-net3 - Question- Chuck or Priscilla any
> input?
>
>
> Dear folks,
>
> I would like to do some research on the strange behavior of the switch =
> type basic-net3.
>
> Usually when a show ISDN status command is done and an ISDN BRI is =
> correctly configured
>
> it will show the physical layer as "ACTIVE" unless backup interface =
> commands are in use.
>
> When backup commands are in use the output of the show isdn status show =
> the physical
>
> layer as "DEACTIVATED". This switch type is used in Europe has the =
> behavior of showing the=20
>
> physical layer as "DEACTIVATED" and no backup commands are being used. =
> This causes some
>
> confusion where I work at. Anyway, I would like to research this further =
> but seems like the CCO
>
> is only interested in how to enter this switch type in a router =
> configuration and other sources which
>
> I have looked are very sketchy on information on the switch capabilites. =
> Any information
>
> would be appreciated.
>
> Sincerely,
>
> Raul
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
