Enable portfast on the ports where you have workstations and servers
connected to:
3524#conf t
3524(config)#int fas 0/1 (modify to point to the right port)
3524(config-if)#span portf
3524(config-if)#end
3524#
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: atif [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 11, 2000 8:14 AM
To: cisco group study
Subject: cisco 3524 XL EN problem
Importance: High
i have installed a cisco 3524 xl en switch, i am facing a weird kind of =
problem i hope u guys will help me solve this problem.
the problem is that when a pc is connecte to switch for the 1st time it =
takes about 4 to 5 minutes for the switch to communicate with the =
machine.The led on both sides shows green light even when its not =
communicationg and the ping request is timed out.
then after that it takes about 1 minute for computer to see the switch =
if we take the connecter out of the switch and inserts again.
now todays it happened that after the weekend when computers were =
started some were communicating and many were not and all leds were =
showing green lights and after one hour or so every thing was =
normalized.
i havent seen this sort of problem before, this switch at the moment is =
running at default configuration and connected to a router to a vsat =
link.
i havent assigned ip add info so far , can this be a problem( i dont =
think so).=20
can any body figure it out what is the problem,
is something wrong with cabling,switch or NIC.
atif
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
