Try spanning-tree portfast...
Thanks,
Chris Boyd, CCNA
Network Support
Alex Lee, Inc.
120 4th St SW
Hickory NC 28603
828-323-4103
www.alexlee.com
----- Original Message -----
From: "atif" <[EMAIL PROTECTED]>
To: "cisco group study" <[EMAIL PROTECTED]>
Sent: Monday, December 11, 2000 9:14 AM
Subject: cisco 3524 XL EN problem
> i have installed a cisco 3524 xl en switch, i am facing a weird kind of =
> problem i hope u guys will help me solve this problem.
> the problem is that when a pc is connecte to switch for the 1st time it =
> takes about 4 to 5 minutes for the switch to communicate with the =
> machine.The led on both sides shows green light even when its not =
> communicationg and the ping request is timed out.
> then after that it takes about 1 minute for computer to see the switch =
> if we take the connecter out of the switch and inserts again.
> now todays it happened that after the weekend when computers were =
> started some were communicating and many were not and all leds were =
> showing green lights and after one hour or so every thing was =
> normalized.
> i havent seen this sort of problem before, this switch at the moment is =
> running at default configuration and connected to a router to a vsat =
> link.
> i havent assigned ip add info so far , can this be a problem( i dont =
> think so).=20
> can any body figure it out what is the problem,
> is something wrong with cabling,switch or NIC.
>
> atif
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
