Here is the config between two router with Ethernet interfaces for
DLSw. (The other site is just a mirror image).
When I perform a "show dlsw peer", the state is CONNECT
However, "sh dlsw reachability " and "show dlsw circuits " is empty.
Also, "show dlsw capabilities " has " reachable mac addresses : none"
All the interfaces on the network has connectivity to each other, and
there is no access list.
Thanks in advanced
===============================================
source-bridge ring-group 1234
dlsw local-peer peer-id 137.20.103.2
dlsw remote-peer 0 tcp 137.20.100.1
dlsw bridge-group 1
int e0
ip address 137.20.40.1 255.255.255.0
bridge-group 1
no shut
bridge 1 protocol ieee
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]