the serial 0:15 etc means the 15th (virtual) modem on the first (0 E1
controller) PRI.
Babar Hameed
Network Engineer
Unisys Pakistan
-----Original Message-----
From: "Frank" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Wed, 13 Dec 2000 13:21:21 +0800
Subject: about AS 5300
> i am reading a config example about 5300 which has octal E1/PRI card
> with 4
> serial interfaces.
> there are "controller E1 0","int s0...int s3" items.
> but what does "int s0:15...int s7:15" mean?
> i guess they are the signalling channels of 8 E1 controllers.
> why use int serial term?
>
> Any explanations about this is greatly appreciated.
>
>
> frank
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
