Each T1/E1 uses a virtual serial interface when it comes in the NAS with PRI
signaling. 15, if I am correct is the D-channel on the E1-PRI (equal to
channel 23 on a T1 PRI).
No modems involved.
Adam
[EMAIL PROTECTED]
----- Original Message -----
From: "Babar Hameed" <[EMAIL PROTECTED]>
To: "Frank" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, December 13, 2000 12:09 AM
Subject: Re: about AS 5300
> the serial 0:15 etc means the 15th (virtual) modem on the first (0 E1
> controller) PRI.
>
> Babar Hameed
> Network Engineer
> Unisys Pakistan
>
> -----Original Message-----
> From: "Frank" <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Date: Wed, 13 Dec 2000 13:21:21 +0800
> Subject: about AS 5300
>
> > i am reading a config example about 5300 which has octal E1/PRI card
> > with 4
> > serial interfaces.
> > there are "controller E1 0","int s0...int s3" items.
> > but what does "int s0:15...int s7:15" mean?
> > i guess they are the signalling channels of 8 E1 controllers.
> > why use int serial term?
> >
> > Any explanations about this is greatly appreciated.
> >
> >
> > frank
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
