I'm not an ISDN guru but it appears that the s0:15 s7:15 commands are used to
configure the D channel on a E1 PRI.
---------- Original Message ----------------------------------
From: "Frank" <[EMAIL PROTECTED]>
Reply-To: "Frank" <[EMAIL PROTECTED]>
Date: Wed, 13 Dec 2000 13:21:21 +0800
>i am reading a config example about 5300 which has octal E1/PRI card with 4
>serial interfaces.
>there are "controller E1 0","int s0...int s3" items.
>but what does "int s0:15...int s7:15" mean?
>i guess they are the signalling channels of 8 E1 controllers.
>why use int serial term?
>
>Any explanations about this is greatly appreciated.
>
>
>frank
>
>
>_________________________________
>FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
