I also have this problem on a 3640 IOS 12.1 as below
(See attached file: vty_lines.txt)
"Larry Ogun-Banjo" <[EMAIL PROTECTED]> on 12/19/2000 03:43:31 PM
Please respond to "Larry Ogun-Banjo" <[EMAIL PROTECTED]>
To: "Patrick Murphy" <[EMAIL PROTECTED]>
cc: [EMAIL PROTECTED] (bcc: Larry Ogun-Banjo/EN/Kpn-Orange)
Subject: Re: Creating more than 5 vty lines
Thanks Patrick but it doesn't work. See below. Any other suggestions?
ROUTERA#conf t
Enter configuration commands, one per line. End with CNTL/Z.
ROUTERA(config)#line vty ?
<0-4> First Line number
ROUTERA(config)#line vty 5 10
^
% Invalid input detected at '^' marker.
ROUTERA(config)#
"Patrick Murphy" <[EMAIL PROTECTED]> on 12/19/2000 03:08:03 PM
Please respond to "Patrick Murphy" <[EMAIL PROTECTED]>
To: Larry Ogun-Banjo/EN/Kpn-Orange@kpn-orange, [EMAIL PROTECTED]
cc:
Subject: Re: Creating more than 5 vty lines
RouterA(config)# line vty 5 10
RouterA(config)# password XXXXXX
RouterA(config)# login
----- Original Message -----
From: "Larry Ogun-Banjo" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, December 19, 2000 9:05 AM
Subject: Creating more than 5 vty lines
> Could anyone kindly assist, please. On a Cisco router,2500, I am trying to
> create more that 5 vty lines. By default, you have 0-4 when you use the
line vty
> ? command. However, I need to create more lines and the router doesn't
allow me
> to increase the lines. I am running IOS 11. Many thanks.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]