I added line vty 5 15 on my 2501 running 12.0(9)
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kevin Wigle
Sent: Tuesday, December 19, 2000 7:42 AM
To: Ole Drews Jensen; 'Patrick Murphy'; Larry Ogun-Banjo;
[EMAIL PROTECTED]
Subject: Re: Creating more than 5 vty lines
Just a fyi, I was allowed to create more vty's on a 7505 with 12.1.(2) T
but I couldn't on a 4500M with 12.0.10
and I couldn't on a LS-1010 with 11.2(8)WA3(3)
Kevin Wigle
----- Original Message -----
From: "Ole Drews Jensen" <[EMAIL PROTECTED]>
To: "'Patrick Murphy'" <[EMAIL PROTECTED]>; "Larry Ogun-Banjo"
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, December 19, 2000 9:37 AM
Subject: RE: Creating more than 5 vty lines
> Hmm,
>
> I cannot expand my vty lines on my devices either.
>
> I have:
>
> 2501 with IOS 11.0
> 3548 with IOS 12.0
> 3620 with IOS 12.0
>
> The 2501 and 3620 have 0-4 and the 3548 have 0-15.
>
> However, Patrick's example should work according to the information I read
> on Cisco's site, so a little investigation would probably help. I will see
> what I can find.
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> http://www.oledrews.com/ccnp
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
> -----Original Message-----
> From: Patrick Murphy [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, December 19, 2000 8:08 AM
> To: Larry Ogun-Banjo; [EMAIL PROTECTED]
> Subject: Re: Creating more than 5 vty lines
>
>
> RouterA(config)# line vty 5 10
> RouterA(config)# password XXXXXX
> RouterA(config)# login
>
>
> ----- Original Message -----
> From: "Larry Ogun-Banjo" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, December 19, 2000 9:05 AM
> Subject: Creating more than 5 vty lines
>
>
> > Could anyone kindly assist, please. On a Cisco router,2500, I am trying
to
> > create more that 5 vty lines. By default, you have 0-4 when you use the
> line vty
> > ? command. However, I need to create more lines and the router doesn't
> allow me
> > to increase the lines. I am running IOS 11. Many thanks.
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
