Hi Sim
If you are running CISCO frame encap then you can see the bandwidth of
the line with the
SH FRAME-RELAY MAP command
Hope this helps
Dave
"Sim, CT (Chee Tong)"
<[EMAIL PROTECTED] To: [EMAIL PROTECTED]
obank.com> cc:
Sent by: Subject: any command to check the
bandwidth of frame relay link?
[EMAIL PROTECTED]
12/20/2000 07:04
Please respond to
"Sim, CT (Chee Tong)"
Hi.. Dear all,
May I know is there a command to check the real bandwidth of the frame
relay
line? I have a frame relay link from Singapore to Jakarta as shown. what is
mean by BW 64 Kbit, ? They told me it is 128K, CIR 64K, but I cannot tell
from below.
Sim
Serial0 is up, line protocol is up
Hardware is PowerQUICC Serial
Description: --- XNR=57754E DNA=2622024 MTN port=AJKT5-12/5
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 15/255, rxload 7/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 30201, LMI stat recvd 30202, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 21916/0, interface
broadcasts 16853
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 3d11h
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/18/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 2000 bits/sec, 4 packets/sec
5 minute output rate 4000 bits/sec, 4 packets/sec
841970 packets input, 340086907 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
5 input errors, 3 CRC, 0 frame, 0 overrun, 0 ignored, 2 abort
848797 packets output, 303003541 bytes, 0 underruns
0 output errors, 0 collisions, 4 interface resets
0 output buffer failures, 0 output buffers swapped out
31 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Serial0.2 is up, line protocol is up
Hardware is PowerQUICC Serial
Description: --- To SIN01 ser 1/1.19 ---
Internet address is 57.200.243.12/30
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 15/255, rxload 7/255
Encapsulation FRAME-RELAY
JKT01>
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
